| Subject | Text |
| If the crt heater is open circuit (broken) it is completely kaput. Sorry. |
| BNC cabling | Basically, is it possible to display (patch in) component video from a dvd player to a 21" computer |
|
|
| something i got from highland electrix
ICC17 CRT BASE SPARKS,LOPTX(HR8317) ADD 470PF2KV ACROSS LOPT |
| hitachi 27cx30bc | i can`t get the low channel(2``3``4``5``) the tuner seem to be in good shape any tips will be welcom |
| It could be a thousand different things. It may help to state the make, model and chassis. |
| sony 25xid | I dont think its the CRT because sometimes working fine |
| re; too bright | Hi, try turning the "screen control" counter clockwise a little, I
don`t work on monitors so I`m no |
| vertical IC in your television | The vertical IC is never mounted on the crt board.
In modern TV's, it could be a TO220 device (TDA9 |
| As far as i see it is an 11AK19P chassis
so try this one
http://www.eserviceinfo.com/download.php? |
| Fuse? | Thanks - I really appreciate the response. Now that I've pulled the beast from it's perch, all I ha |
| prossesor Telefunken F950M ICC9/FR | Hi
I have a TV Telefunken F950M the chassis is ICC9/FR.
I need a new prossesor ic.
The origina |
| JVC AV-35BP3 Schematic Needed for Charity Work | Need a schematic for a JVC av-35bp3.
This is for a set donated to charity.
Symptoms: DOA, rel |
| Thanks madmatt2024 :idea:
I think you've given good suggestions & precautions, that's very |
| ak19 | [b:d7090ddf95][i:d7090ddf95] :D firstl check the 2,2 ohms fusible for oc,(ew circuit),check c630 for |
| Manual de service TV TELEFUNKEN | I need service manual for TV TELEFUNKEN SLX 295 PIP Chassis: ICC5 618 B-2PIP
Thanks in advance
|
| HI
PLEASE GIVE THE BRAND AND THE MODEL OF YOUR TV.
(THE BIN FILE IS WITH BRAND AND MODEL NO WITH C |
| Yes, right, it's likely to be the screen voltage wire. It's either that or a crt board ground. If y |
|
|
| Test your CRT for weak emision. If weak the video is blanked out. They can be restored with a sencor |
| plese the chassis.
I have this
BEKO.bin = TV 14" BEKO BEKOTEKNIK
PROCESSOR SDA20581-A504
|
| Sharp DV5407 (DECO5) | Need schematic for Sharp DV5407S (DECO5 chassis). Found similar at http://www.eserviceinfo.com/downl |
| Gateway VX1120 or Mitsubishi 2060u Service manual? | Hello
Im looking for the service manual for either of those monitors, I search everywhere and I c |
| Model, chassis ?
Give us some info please. |
| panasonic TC-21L3A tv | hi, could anyone help with a panasonic TC-21L3A tv on a mx1 chassis service manual.
thanks
regar |
| hello,
check the crt socket for some corrosion at the focus. if you find some bluish color replac |
| Re: Philips Magnavox 9P6444 64" RPTV has Green Haze | [quote:b1dfe1bdba="NTL1991"]Hello. I have a Philips Magnavox 64" Rear-Projection TV that was ma |
| Re: Philips tv will not turn on!! | [quote:08293e4cb1="jobby"]Hi i have a PHILIPS Widescreen 100hzt TV model no. 32pw9576/05R.
The tv |
| tech tip rca tv itc008fam | need tech tip on rca tv model 27r410t chassis itc008fam. won't power up. voltage drop on secondary s |
| I carefully looked at the picture you posted... | I must be blind... I see the CRT board. I don't see any white cabling that is loose. I may can be of |
| For one thing, there is no lasers in television sets. You have a cold solder connection for the heat |
| I need a service manual or a schematic for a TV Precision... | ...Is for the TV Precision PTV1345RMS
is the chassis "C-700 A/B"?
I am needing the schemarics, ple |